2.2kw sewage treatment high pressure regenerative blower

Detail Parameters of  GHBH 003 34 1R5

Main Features of Goorui Regenerative Blower :

1. Adopt SKF & NSK bearing.

2. Use ADC12 aluminum alloy material.(same to BMW's wheel hubs)

3. Random installation( vertical or horizontal)

4. Insulation class: F, Protection class: IP54

5. 100% oil free air delivery ( Impeller connected to the motor directly, without any oil lubricating) 
6. No routine maintenance (whithout wheel gear and belt,don't need to do maintenance towards those parts)
7. Quiet operation, low noise(adopt low noise motor, meanwhile inlay muffler is available if lower noise required)

8.Variable output control(pressure or vacuum)

9.Pulsation-free compression(use quakeproof footstand)

10.Long term durability(24H running)

11.Strictly tested before leaving the factory

12.CE, SGS , CCC, RoHS, ISO9001 certified.

Model Selecting Curve of Goorui Regenerative Blower:

The performance curves of GOORUI blower is tested under the condition of 1013 mbar pressure,15 °C temerature (allow ±10% difference).

Structure and Operation Principle of Goorui Regenerative Blower:

       Goorui regenerative blower is made up with impeller, casing, inlet and outlet, brackets, motors, pulleys, couplings, muffler, transmission parts (bearings), installed base, etc.

      Air gets-in through the inlet (1), then enters the side channel (2), now the high-speed-circling impeller will push the air to run after its direction. Meanwhile, centrifugalization makes the air running outward,which will give it higher speed and bigger pressure.

     With operation of impeller  ,the air will be speeded and  pressed again and again.

     When the pressure were higher than outside,the air will get out from the outlet (4).

Applications of Goorui Regenerative Blower:

 

 

Company Information

    Dongguan Foersheng Mechanical &Electrical Technology Company Limited (FLS) is one of the world's leading manufacturers and suppliers with over 10 years experience in blower and motors R&D, producing, marketing and after sales service. And it is a subsidiary of Hong Kong FengLiSheng International Group,Which has established since 2000,and has own a manufactory center in Dongguan City,also 4 sales subsidiaries in Dongguan, Shanghai, Chengdu and Qingdao city.

    GOORUI,the main brand of Hong Kong FengLiSheng International Group was originate from Hanover
university,German.And it has been proposed and improved in China.Nowadays,GOORUI has won a
worldwide reputation with all the effort of our colleagues and has expanded its service network to
more than 20 countries.

 

In 2004, Goorui brand was set up with launching its single stage blowers (the power ranges from
200W to 7500W).
In 2005, Goorui was selected to apply into Qinghai-Tibet Railway project.

In 2007, Goorui double stage blower debuted in China

In 2008, following Siemens, Goorui has developed and produced its GHBG series blowers and
became world's NO. 2 manufacturer of three stage blowers. "German trademark certificate"
certified.

In 2009, Goorui succeeded in its mass production of high power blowers ranging from7.5kw and 25
kw. It accordingly proved to be China's first and World's second manufacture that produces high
power blowers of widest range.

 

 

Office & Factory:

 

 

 

cooperative corporations:

 

 

 Certificates:

SGS,CE,RoHS, ISO 9001: 2000 ,CCC

Except all above,we are also "Dongguan city high technology private company" awarded in 2008; "Guangdong Province high technology private company" passed in 2010; "Dongguan city patent foster company" awarded in 2011.

 

Exibitions:

HANOVER MESS in GERMANY